What temperature for NYLON on the K1 Max?

Recommended nozzle temperature for NYLON on the K1 Max is 255°C (range: 240–270°C). Bed temperature: 75°C.

What bed temperature for NYLON on the K1 Max?

Set the K1 Max bed to 75°C for NYLON. The acceptable range is 70–85°C.

What retraction settings for NYLON on the K1 Max?

Use 0.5 mm retraction distance at 35 mm/s for NYLON on the K1 Max.

What fan speed for NYLON on the K1 Max?

Set the part-cooling fan to 50% for NYLON on the K1 Max. Minimum speed: 20%.

K1 MaxNYLON settings

Slicer settings for printing NYLON filament on the K1 Max. Nozzle temperature, bed temperature, fan speed, retraction, and print speed — sourced from official slicer profiles.

Nozzle temp255°C240–270°C range

Bed temp75°C70–85°C range

Fan speed50%Min 20%

Print speed30 mm/sStarting point

Retraction0.5 mmAt 35 mm/s

Nozzle0.4 mmbrass

Source: Derived. Based on manufacturer specifications.

All nozzle sizes

0.4 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Nylon Generic	255°C 240–270°C	75°C 70–85°C	50% /20%	30 mm/s	0.5 mm @ 35 mm/s	Derived

Tips for printing NYLON on the K1 Max

Dry your filament immediately before printing — NYLON is extremely hygroscopic.
An enclosure is available on this printer and strongly recommended.
Use a hardened steel nozzle for filled variants (glass-fiber, carbon-fiber).

Recommended settings (0.4 mm brass nozzle)

All nozzle sizes

0.4 mm nozzle

Tips for printing NYLON on the K1 Max