What temperature for ABS on the Ender 3 S1?

Recommended nozzle temperature for ABS on the Ender 3 S1 is 245°C (range: 230–260°C). Bed temperature: 100°C.

What bed temperature for ABS on the Ender 3 S1?

Set the Ender 3 S1 bed to 100°C for ABS. The acceptable range is 90–110°C.

What retraction settings for ABS on the Ender 3 S1?

Use 0.5 mm retraction distance at 35 mm/s for ABS on the Ender 3 S1.

What fan speed for ABS on the Ender 3 S1?

Set the part-cooling fan to 20% for ABS on the Ender 3 S1. Minimum speed: 0%.

Ender 3 S1ABS settings

Slicer settings for printing ABS filament on the Ender 3 S1. Nozzle temperature, bed temperature, fan speed, retraction, and print speed — sourced from official slicer profiles.

Nozzle temp245°C230–260°C range

Bed temp100°C90–110°C range

Fan speed20%Min 0%

Print speed40 mm/sStarting point

Retraction0.5 mmAt 35 mm/s

Nozzle0.4 mmbrass

Source: Derived. Based on manufacturer specifications.

All nozzle sizes

0.4 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
ABS Generic	245°C 230–260°C	100°C 90–110°C	20% /0%	40 mm/s	0.5 mm @ 35 mm/s	Derived

Tips for printing ABS on the Ender 3 S1

ABS warps significantly without an enclosure — this printer is open-frame; use a draft shield or enclosure accessory.
Minimize fan cooling — high fan speeds cause layer cracking in ABS.
Increase bed temperature gradually if warping occurs: try 105–110°C.
ABS fumes — print in a ventilated area.

Recommended settings (0.4 mm brass nozzle)

All nozzle sizes

0.4 mm nozzle

Tips for printing ABS on the Ender 3 S1